Charaterization of your effluents
Port de Bouc laboratory
Wherever your effluents come from, CTP environnement is able to determine their characteristics in order to treat them :
- COD, TSS, Dry weight, chlorides, pH, conductivity, hardness (Mg, Ca), sulphates, ammonia
- Metallic compounds : Iron, Copper, Aluminium, Nickel, Chromium, Lead, Zinc...
Further analyses can be achieved in partnership with COFRAC certified laboratories.
Treatability tests on pilot units
Cross-flow membrane filtration pilot
Our laboratory is equiped with several lab-scale pilot units allowing us to simulate different treatments on all kind of effluents and aqueous wastes :
- Physical-chemical treatment (neutralisation, coagulation, metallic precipitation, flocculation)
- Vacuum evaporation
- Cross-flow membrane filtration
- Media filtration (sand, sieve...)
- Activated carbon adsorption
- Chemical oxidation
- Sludge dewatering
- ...
Tests report
Vacuum evaporation pilot unit
At the end of the tests, a synthetic report will give you the elements to allow you to choose the most appropriate treatment :
- The tests protocol
- The achieved results : feasibility and performances
- A technical and economical comparative of the tested treatment lines
- A pre-dimensioning and technical recommendations
- A proposal for :
- A technical assistance to implement or revamp your wastewater treatment equipment
- The use of our mobile treatment units
Your project is unique. Do not hesitate to contact us to get a specific answer for your needs.